RMS Program Power, both channels driven : 2 x 60 W / 100 V
note: power output controlled by digital limiter
Lo-cut filter : 75 Hz / 12 dB/oct
speaker impedance - connection : 167 ohms
secured : screw terminals
RS232 : SUB-D9, galvanically isolated
IR (IR-remote control optional) : front IR eye, rear mini-jack
Source inputs A-B-C-D Input impedance / sensitivity : 15 Kohm / 0,3V -10dBV, MAX 2,7V +8,5dBV
Source inputs A-B-C-D digital preset gain range : -20 / +14 dB
Source digital tone control : Bass 90Hz, Treble 15 KHz, +/- 14dB
Automatic Loudness : +6dB (90Hz) / +4dB (15 KHz) to FLAT 0dB
Micro balanced Input impedance / sensitivity : 1,5 Kohm / 1,5 mV -56dBV, MAX 0,4V -8dBV
Micro balanced Input rear panel gain trim : -56 / -16 dBV mic - line
Micro Tone control ; rear panel Lo - Hi : 100Hz/+3dB,10kHz/-6dB to 100Hz/-9dB, 10KHz/+4dB
Pre-out impedance / sensitivity : 1 K ohm / 0 dBV
Line-out impedance / sensitivity : 1 K ohm / +3 dBV
Operation modes : stereo / 2 zones linked / 2 individual zones
Micro : Paging 1 or 2 zone
Frequency response : (- 0,5 dB) 10Hz-40 KHz
THD : < 0,05%
IMD : < 0,09%
Noise A-weighted : > 100 dBA
Gain : 33 dB
Damping Factor : > 100
Protection systems : DC, temp, clip, overcurrent, short-circuit
Cooling : convection, no fan
Power consumption : max 170 Watt
Mains Power requirements : 240 - 230 Vac, 50-60 Hz
Temperature operating range : 0° - 40°c
Dimensionen: 430 (without rackears) x 88 x 290 mm (320 mm
including knobs) |
